{"title":"GritShift Suspension","description":"\u003cp\u003eShop GritShift suspension at Live the Gnar. Check each product for fitment, specifications, and available options.\u003c\/p\u003e","products":[{"product_id":"heavy-hitter-billet-reinforced-suspension-linkage","title":"Heavy Hitter Billet Reinforced Suspension Linkage","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eHeavy Hitter has produced an amazing upgrade for your favorite e-bike. The rear suspension linkage is a known weak point in the stock suspension setup. Many riders have complained about suspension noise and play since the bike was released.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThat play means it's only a matter of time until bearing and linkage failure comes.\u003c\/p\u003e\n\u003cp\u003eOur linkage is designed with 4mm of shock preload. Your linkage will lightly rest on the swingarm at full droop with the rear wheel off the ground. This is a huge advantage for all bikes! Most Mountain bike suspension does not include a top out control on the shock. Unfortunately, this leads to the shock shaft and seals slamming into the shock body at full droop. If this happens continuously, it will prematurely blow out your suspension seals and rebound control.\u003c\/p\u003e\n\u003cp\u003eTo prevent premature shock wear, we have designed the linkage to have 4mm of top out stop, similar to limiting straps found on Trophy trucks and side by sides. This will greatly increase the life of your shock and components - especially for heavier riders needing 550-650 lb. springs, and guys that love sending big jumps. \u003c\/p\u003e\n\u003cp\u003eThis will only fit the correct 10.5 x 3.5 inch, and smaller shocks! Longer shocks are not advised. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Always grease bearings before riding!\u003c\/p\u003e\n\u003cb\u003eFeatures\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eMade from 7075 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eSteel bushings for a precision no slop fit\u003c\/li\u003e\n\u003cli\u003ePre-Assembled with new bearings, bushings, and seals\u003c\/li\u003e\n\u003cli\u003eImproved quality and strength!\u003c\/li\u003e\n\u003cli\u003eSimple installation takes 20 minutes or less\u003c\/li\u003e\n\u003cli\u003eType 2 black anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eTalaria Sting\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45202546655444,"sku":"SQ9832654","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/8551\/1636\/files\/GritShiftBilletReinforcedSuspensionLinkage.jpg?v=1780782146"},{"product_id":"heavy-hitter-85-mx-fork-conversion-kit","title":"Heavy Hitter 85 MX Fork Conversion Kit","description":"\u003cp\u003eIf you're one of the few riders that wants to push your Sur Ron or Talaria to the absolute limit – far beyond what the stock mountain bike-derived front end can handle – those mountain bike suspension options just aren’t going to cut it.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWith robust CNC machined parts delivering optimized geometry, you can now transform your Sur Ron or Talaria with the addition of tried and true KTM capability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBorn of necessity.\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e We designed the Heavy Hitter Big Sender MX fork conversion kit out of necessity. Ask us how many stock Sur Ron and Talaria forks we blew through before we decided to fix the problem. On second thought, don’t ask – we stopped counting after a while. For the kind of riding we do, from hard stunting to hard enduro and everything in between, there’s just no way a mountain bike fork is going to hold up. One night we looked across the shop and saw a perfectly good KTM 85 sitting there, and one thing led to another, and the Big Sender kit was born soon after.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTrue KTM quality.\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e We found the 85cc KTM platforms are sprung very accurately for the weight of Sur Rons and Talarias, especially factoring in the added weight of an upgraded bike. If you’re at this point in your build, you have probably added about 20 pounds to your bike already from a bigger battery and additional accessories, and the Big Sender kit is the icing on the cake.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFix all your problems.\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e Not only does this kit let you tack on a far more robust set of forks, you can also dial in your settings in ways MTB forks cannot. You can now run your choice of KTM 85 MX forks and a wider variety of front wheels, and the short service intervals of the OEM front forks are eliminated. All you need is this kit and a complete KTM 85 MX front end (explained below).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eRobust construction.\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e The Big Sender kit consists of billet aluminum bearing cups, pre-pressed bearing races, and a durable black anodized finish on external components. We beat the absolute heck out of this setup before bringing it to market so you don’t have to worry while you’re going full send.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eTake your e-bike into another level of capability with the Heavy Hitter Big Sender kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eConvert your e-bike to run real MX forks from a KTM 85\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eEliminate weak failure points and short service intervals of OEM front end\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eGain the ability to dial in settings for your weight and riding style\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePre-pressed bearing races for simple install\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003e\u003ciframe data-dashlane-frameid=\"5653\" width=\"1250\" height=\"703\" src=\"https:\/\/www.youtube.com\/embed\/EfqUklXFB3Q\" title=\"Talaria Sting “HOW TO” WP 43MM fork conversion\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTechnical Notes\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eA complete KTM 85 MX front end is required.\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e This usually ranges from $799 to $2,599. A complete front end consists of fork tubes, triple clamps, front braking system, front wheel (19\" recommended), front axle, and MX style handlebars. Price is largely dependent on which fork style you choose: Dual cartridge spring forks are heavier but cheaper, whereas air forks found on 2018+ models are lighter but more expensive. From our experience, we would choose air forks every time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNote for KTM air forks.\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e Please check clearances on the bottom for the 2 posts on the triple clamp where the fender bolts in. This may need to be slightly shaved for adequate clearance and is only an issue with some years and brands of triple clamps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSur Ron LBX\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSegway X160\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSegway X260\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eTalaria Sting\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is the known and tested compatibility for this product. Factory variations, dealer options, and aftermarket modifications could affect compatibility in your specific case. Please verify compatibility to the best of your ability before purchasing.\u003c\/span\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Sur Ron","offer_id":45202546786516,"sku":"SQ221485","price":49.99,"currency_code":"USD","in_stock":false},{"title":"Talaria","offer_id":45202546819284,"sku":"SQ2241252","price":44.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/8551\/1636\/files\/ERide85mxCupKit1_88782689-365e-4b09-b349-d6deab04f724.jpg?v=1780774346"},{"product_id":"heavy-hitter-reinforced-suspension-triangle-for-talaria-sting","title":"Heavy Hitter Reinforced Suspension Triangle for Talaria Sting","description":"\u003cp\u003eEver feel like your Sting’s rear suspension just isn’t up to the task? Get ahead of potential failure by upgrading your Sting’s suspension triangle to this robust unit from Heavy Hitter.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ePushing a stock Talaria Sting through challenging terrain like big jumps and rough rocks can break the stock triangle surprisingly easily. That weak cast aluminum piece just can’t take the heavy load from hard landings over time or the constant barrage of impacts on a hard enduro course. People have even caused damage from just hopping curbs and living the stunt life, and if your suspension triangle breaks, you’re walking home.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eTested by both stunters and hard enduro riders, the Heavy Hitter suspension triangle has a reinforced billet aluminum construction that can handle the gnarliest conditions. To really beef up your Sting’s rear suspension, upgrade your linkage at the same time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUpgrade the weak factory suspension triangle with this robust unit from Heavy Hitter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMade from 7075 billet aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3x stronger than OEM Talaria Sting suspension triangle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBlack anodized finish for lasting good looks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eInstalls in less than 20 minutes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDesigned and manufactured in Florida, USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eTalaria Sting\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is the known and tested compatibility for this product. Factory variations, dealer options, and aftermarket modifications could affect compatibility in your specific case. Please verify compatibility to the best of your ability before purchasing.\u003c\/span\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45202546852052,"sku":"SQ2982324","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/8551\/1636\/files\/TalariaStingSuspensionTriangleUpgrade2_4b42617e-6f13-4900-9c78-736a0f2738e9.jpg?v=1780775375"},{"product_id":"heavy-hitter-titanium-1-5-linkage-upgrade","title":"Heavy Hitter Titanium 1.5\" Linkage Upgrade for Sur Ron LBX | Segway X260 | Segway X160","description":"\u003cp\u003eHeavy Hitter proudly presents the most robust and lightweight linkages on the market. \u003cstrong\u003eWHY? \u003c\/strong\u003eyou might ask. Well that's because we at GritShift have broken just about every linkage on the market. Usually from big jumps and hard landings, but we have also seen premature failure from just woods riding. And that's when Heavy Hitter decided to design the TI Linkage that can withstand the abuse we give our bikes. \u003cbr\u003e\u003cbr\u003eNot only could a broken linkage ruin your weekend riding trip, but it could also destroy your rear shock. Usually, if a linkage breaks it will bend the output shaft of your shock. And if you have an OEM shock, you probably should have upgraded that regardless, but if you have an already upgraded shock, well... You will likely have to buy another one.\u003c\/p\u003e\n\u003cp\u003eThe Heavy Hitter Linkage is crafted from solid Titanium Ti-6Al-4V, these linkages offer unparalleled durability and performance. Designed with precision, these linkages perfectly align with a 1.5-inch lift, striking the ideal balance between front grip, and rake angle, with rear grip. \u003c\/p\u003e\n\u003cb\u003eFeatures\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003e1.5 Inch lift\u003c\/li\u003e\n\u003cli\u003eJet wash finish \u003cspan data-mce-fragment=\"1\"\u003eTitanium Ti-6Al-4V\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eExtremely strong and lighter than other aftermarket options\u003c\/li\u003e\n\u003cli\u003eSimple install in less than 20 minutes\u003c\/li\u003e\n\u003cli\u003eOur strongest, lightest, cleanest, highest quality Parts for your E-bike\u003c\/li\u003e\n\u003cli\u003eThe total weight of the linkage, bearings, and sleeves is 7 ounces. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eSur Ron LBX\u003c\/p\u003e\n\u003cp\u003eSegway X260\u003c\/p\u003e\n\u003cp\u003eSegway X160\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45202547278036,"sku":"SQ8923456","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/8551\/1636\/files\/Heavy-Hitter-Titanium-1.5_-Linkage-Upgrade-for-Sur-Ron-LBX-_-Segway-X260-_-Segway-X160-GritShift_Live-the-Gnar-28299891.jpg?v=1770311610"},{"product_id":"heavy-hitter-titanium-triangle-upgrade","title":"Heavy Hitter Titanium Triangle  Upgrade for Sur Ron LBX | Segway X260 | Segway X160","description":"\u003cp\u003eWhen it comes to enduring the immense pressure of jumps and off-road adventures, suspension triangles play a pivotal role. Unfortunately, the factory triangles, composed of relatively inexpensive aluminum material, are susceptible to fracturing into separate pieces under excessive loads or upon landing.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBut fear not! Heavy Hitter brings you the epitome of strength and lightweight design with our exceptional triangles. Crafted from solid Titanium Ti-6Al-4V, these triangles are the epitome of resilience and durability.\u003c\/p\u003e\n\u003cp\u003eRest assured, this remarkable product impeccably preserves the OEM suspension geometry while ensuring a flawless fitment with all available linkage options. Upgrade your gear today with Heavy Hitter Titanium Parts and unlock unparalleled performance!\u003c\/p\u003e\n\u003cb\u003eFeatures\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eJet wash  finish \u003cspan data-mce-fragment=\"1\"\u003eTitanium Ti-6Al-4V\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eExtremely strong and lighter then other aftermarket options\u003c\/li\u003e\n\u003cli\u003eSimple install in less than 20 minutes\u003c\/li\u003e\n\u003cli\u003eOur strongest, lightest, cleanest, highest quality triangle for your E-bike\u003c\/li\u003e\n\u003cli\u003eTotal Weight of the triangle is 6 ounces. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eSur Ron LBX\u003c\/p\u003e\n\u003cp\u003eSegway X260\u003c\/p\u003e\n\u003cp\u003eSegway X160\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45202547343572,"sku":"SQ2935842","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/8551\/1636\/files\/Heavy-Hitter-Titanium-Triangle-Upgrade-for-Sur-Ron-LBX-_-Segway-X260-_-Segway-X160-GritShift_Live-the-Gnar-115691538.jpg?v=1770319678"},{"product_id":"heavy-hitter-titanium-suspension-hardware","title":"Heavy Hitter Titanium Suspension Hardware for Sur Ron LBX | Segway X260 | Segway X160","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eOur bolt kit works with Prickly Linkage\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003eIntroducing the Heavy Hitter Titanium Suspension Hardware, the ultimate solution for upgrading from those frustrating low-quality stock bolts that bend or strip upon removal. This permanent replacement is a game-changer.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe OEM and even some upgraded rear suspension hardware kits lack one very important thing that we made sure to do the correct way. Which is providing the proper shoulder length for each bolt. All of your OEM hardware has improper spec shoulder length which causes the bolt to bend\/break on the threaded area. The worst is most upgraded hardware is just replicating the OEM hardware and using different materials.\u003cbr\u003e\u003cbr\u003eWe made sure to do this 100% these bolts have been CAD designed ourselves to the specs they should have been in the first place.\u003c\/p\u003e\n\u003cp\u003eUpgrade your E-bike's suspension hardware with the Heavy Hitter Titanium Suspension Hardware and experience the pinnacle of quality and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eSuspension hardware torque setting is 25 Ft.\/lbs\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFully shanked bolts eliminate the risk of threaded sections damaging your frame or swingarm.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe one-piece Triangle Pivot bolt features a large flanged face that acts as a protective shield.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBid farewell to the OEM's mix of loose bushings, and undersized bolts with the new one-piece pivot bolt.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFour nylon washers are included to safeguard the needle cage bearing from dirt and water, placed between the pivot bolt flange and triangle to frame.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFitment:\u003c\/h3\u003e\n\u003cp\u003eSur Ron LBX\u003c\/p\u003e\n\u003cp\u003eSegway X260\u003c\/p\u003e\n\u003cp\u003eSegway X160\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45202547376340,"sku":"SQ9824562","price":170.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/8551\/1636\/files\/Heavy-Hitter-Titanium-Suspension-Hardware-for-Sur-Ron-LBX-_-Segway-X260-_-Segway-X160-GritShift_Live-the-Gnar-41133066.jpg?v=1770312618"},{"product_id":"heavy-hitter-ultra-bee-triangle","title":"Heavy Hitter Ultra Bee Triangle","description":"\u003cp\u003eIntroducing the Heavy Hitter Ultra Bee Triangle - Elevate Your Sur-Ron Ultra Bee's Durability and Performance to the Extreme!\u003c\/p\u003e\n\u003cp\u003eAre you ready to supercharge your Sur-Ron Ultra Bee electric bike and take on the toughest terrain with confidence? Look no further than our Heavy Hitter Ultra Bee Triangle, the ultimate upgrade designed to transform your off-road adventures into epic journeys.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eElevate your Sur-Ron Ultra Bee's off-road prowess with the Heavy Hitter Ultra Bee Triangle. It's the ultimate solution for riders who demand the pinnacle of durability, stability, and control. Whether you're navigating treacherous trails or aiming to push your electric bike's limits in moto, this component equips you for the journey.\u003c\/span\u003e\u003c\/p\u003e\n\u003cb\u003eFeatures\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003e7075 T6 aluminum \u003c\/li\u003e\n\u003cli\u003eBlack anodized for superior finish quality\u003c\/li\u003e\n\u003cli\u003eEngineered for reduced bushing drag when used with Heavy hitter linkage\u003c\/li\u003e\n\u003cli\u003eSeamless install in a few minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eSur Ron Ultra Bee\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45497500762324,"sku":"SQ6945685","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/8551\/1636\/files\/PhotoFeb022024_35344PM_093ef001-b88f-4c4f-a29a-f4b2ef721774.jpg?v=1780779087"},{"product_id":"heavy-hitter-ultra-bee-linkage","title":"Heavy Hitter Ultra Bee Linkage","description":"\u003cp\u003eIntroducing the Heavy Hitter Ultra Bee Linkage - Elevate Your Sur-Ron Ultra Bee Experience!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAre you ready to take your Sur-Ron Ultra Bee to the next level? Look no further than the Heavy Hitter Ultra Bee Linkage, a high-performance aluminum rear shock linkage designed to supercharge your off-road adventures. Crafted with precision engineering and tailored for the Sur-Ron Ultra Bee, this linkage upgrade should transform your riding experience like never before.\u003c\/p\u003e\n\u003cb\u003eFeatures\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eCrafted from robust 7075T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eStainless Steel Bearing sleeve, increased strength, and long-term wear properties\u003c\/li\u003e\n\u003cli\u003ePress fit nylon bearing seals for increased water ingress protection\u003c\/li\u003e\n\u003cli\u003eNo bushing drag on the sleeve for optimal suspension performance\u003c\/li\u003e\n\u003cli\u003eBlack anodized finish\u003c\/li\u003e\n\u003cli\u003eThis linkage optimizes your bike's suspension system for improved off-road handling.\u003c\/li\u003e\n\u003cli\u003eLocalized thickening in critical areas maximizes strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eSur Ron Ultra Bee\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":45497500991700,"sku":"SQ5826489","price":99.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/8551\/1636\/files\/Untitled-15_36379b90-8584-4c3f-b0d5-bed18f7bf3d2.jpg?v=1780779094"},{"product_id":"heavy-hitter-adjustable-height-suspension-triangle","title":"Heavy Hitter Adjustable Height Suspension Triangle","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFirst of its kind a 2 in 1 adjustable height suspension triangle! The Heavy Hitter E Ride Triangle design has been extensively tested via Static, and Dynamic CAD stress analysis up to 5,000 pounds of force! As well as being field-tested for months before release, on MX tracks, Hard Enduros, and even hare scramble races. \u003cbr\u003e\u003cbr\u003eThe triangle was designed to retain OEM height, or lift the rear by one inch! Some may ask why you want to keep the OEM rear height or lift the rear by 1\/2 inch or 1 inch. Well, it all comes down to preference, and riding style\/terrain. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eHere are some examples, if you keep the OEM 19\" front wheel and decide to put a 16\" rear wheel you might want to raise the rear a little to level the bike out. Or in that same exact instance, you might be riding your bike out in the dunes in soft fast-paced terrains, and you might want to retain the OEM rear lift height so you can have the increased steering trail\/rake angle to give you better steering stability. And to think you can do these adjustments with just one part! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eTested by both MX riders and Hard Enduro Riders, the Heavy Hitter suspension triangle has a reinforced billet aluminum construction that can handle the gnarliest conditions all while packing the powerhouse punch of adjustability in one part. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e7075 T6 Billet Aluminum \u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e304 Stainless Steel Token Inserts For stock 0\", 0.50\", and 1.00\" lift. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBlack Anodized Extreme Durable Oxide Finish to Prevent Corrosion\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eWorks With OEM Linkage or Aftermarket Linkage \u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncrease Tolerances to Prevent Natural Suspension Slop\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eInstall in Less Than 20 Minutes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3 Height Adjustments Stock, + 1\/2 inch,  +1 Inch\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-SS\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is the known and tested compatibility for this product. Factory variations, dealer options, and aftermarket modifications could affect compatibility in your specific case. Please verify compatibility to the best of your ability before purchasing.\u003c\/span\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":46039389208788,"sku":"SQ1948256","price":169.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/8551\/1636\/files\/ERideTriangleAdjustable3.jpg?v=1780773980"},{"product_id":"heavy-hitter-4140-chromoly-e-ride-linkage-triangle-shock-bolt-upgrade-kit","title":"Heavy Hitter 4140 Chromoly E Ride Linkage\/Triangle\/Shock Bolt Upgrade Kit","description":"\u003cp\u003eTrying to find any weak points, or failures testing our adjustable height E Ride Triangle Upgrade we quickly realized how much all of the OEM suspension hardware bent, making it very difficult to remove. We even managed to bend the rear axle a significant amount, which is how the Heavy Hitter Chromoly bolt kit came to life!\u003c\/p\u003e\n\u003cp\u003eCrafted from heat-treated 4140 Chromoly steel, these bolts are engineered for unmatched strength and durability, capable of withstanding extreme conditions without bending, breaking, or snapping. This upgrade replaces all rear suspension hardware (Triangle, linkage, shock bolts.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTurned 4140 Chromoly Steel heat treated for added strength\u003c\/li\u003e\n\u003cli\u003eIncludes all hardware for the rear suspension system \"Triangle, Linkage, Shock\" (bolts, \u0026amp; flange nuts)\u003c\/li\u003e\n\u003cli\u003e6mm Allen and 12mm hex head for easy removal of all bolts\u003c\/li\u003e\n\u003cli\u003eDesigned for the Senders who are tired of bending or breaking other hardware\u003c\/li\u003e\n\u003cli\u003eBlack oxide Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-SS\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":46039389176020,"sku":"SQ2984262","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/8551\/1636\/files\/Heavy-Hitter-4140-Chromoly-E-Ride-Linkage-Triangle-Shock-Bolt-Upgrade-Kit-GritShift_Live-the-Gnar-41325983.jpg?v=1780694122"},{"product_id":"heavy-hitter-billet-suspension-linkage-upgrade","title":"Heavy Hitter Billet Suspension Linkage Upgrade","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eHeavy Hitter has produced an amazing upgrade for your favorite E-Moto. The rear suspension linkage is a known weak point usually on these stock E-Moto suspension setups.\u003c\/p\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003eThis linkage upgrade does retain OEM height. We discovered making height adjustments on the linkage would affect the geometry and articulation negatively. So we retained the OEM mounting positions on this linkage and have made adjustments to our upgraded Triangle\u003c\/p\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003eDesigned for competitive racing and off-road use, our linkage ensures optimal clearance and accurate progression geometry for improved performance in the toughest riding terrain. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Always grease your bearings before installing!\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from 7075 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eHardened Steel bushings for a precision no-slop fit\u003c\/li\u003e\n\u003cli\u003ePre-Assembled with new bearings, bushings, and seals (Don't forget to grease before install)\u003c\/li\u003e\n\u003cli\u003eImproved quality and strength\u003c\/li\u003e\n\u003cli\u003eSimple installation takes 20 minutes or less\u003c\/li\u003e\n\u003cli\u003eType 2 black anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eE Ride Pro-SS\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is the known and tested compatibility for this product. Factory variations, dealer options, and aftermarket modifications could affect compatibility in your specific case. Please verify compatibility to the best of your ability before purchasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":46039389307092,"sku":"SQ1248264","price":96.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/8551\/1636\/files\/Heavy-Hitter-Billet-Suspension-Linkage-Upgrade-GritShift_Live-the-Gnar-24092790.jpg?v=1780690324"},{"product_id":"heavy-hitter-big-sender-e-ride-85-mx-fork-conversion-kit","title":"Heavy Hitter Big Sender E Ride 85 MX Fork Conversion Kit","description":"\u003cp\u003eIf you're one of the few riders who wants to push your E Ride to the absolute limit – far beyond what the stock mountain bike-derived front end can handle, we introduce the Heavy Hitter 85MX Conversion Kit!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis precision machined CNC 7075 aluminum bearing cup kit, allows a tight press fit to your frame's steer tube. This kit comes with new bearings, and cups, which will completely replace your OEM cups and bearings. You will only need to source your own KTM, Gas Gas, or Beta, complete 85cc front end, which will allow you to use the forks, triples, wheel, and brake. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWe found the 85cc KTM platforms are sprung very accurately for the weight of the E-Bike, especially factoring in the added weight of an upgraded bike. If you’re at this point in your build, you have probably added about 20+ pounds to your bike already from a bigger battery and additional accessories, and the Big Sender kit is the icing on the cake.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFix all your problems.\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e Not only does this kit let you tack on a far more robust set of forks, you can also dial in your settings in ways MTB forks cannot. You can now run your choice of KTM 85 MX forks and a wider variety of front wheels, and the short service intervals of the OEM front forks are eliminated. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eTake your e-bike to another level of capability with the Heavy Hitter Big Sender kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eConvert your e-bike to run real MX forks from a KTM 85\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eEliminate weak failure points and short service intervals of OEM front-end\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eGain the ability to dial in settings for your weight and riding style\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePre-pressed bearing races for simple install\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Aia4NZvQvzY?si=JWL1-7tUZnK32dd0\" height=\"315\" width=\"560\" allowfullscreen=\"\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTechnical Notes\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eA complete KTM 85 MX front end is required.\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e This usually ranges from $799 to $2,599. A complete front end consists of fork tubes, triple clamps, front braking system, front wheel (19\" recommended), front axle, and MX style handlebars. Price is largely dependent on which fork style you choose: Dual cartridge spring forks are heavier but cheaper, whereas air forks found on 2018+ models are lighter but more expensive. From our experience, we would choose air forks every time.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003eE Ride Pro-S\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eE Ride Pro-SS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is the known and tested compatibility for this product. Factory variations, dealer options, and aftermarket modifications could affect compatibility in your specific case. Please verify compatibility to the best of your ability before purchasing.\u003c\/span\u003e\u003c\/p\u003e","brand":"GritShift","offers":[{"title":"Default Title","offer_id":46039389339860,"sku":"SQ2894526","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/8551\/1636\/files\/Heavy-Hitter-Big-Sender-E-Ride-85-MX-Fork-Conversion-Kit-GritShift_Live-the-Gnar-41252856.jpg?v=1780693538"}],"url":"https:\/\/livethegnar.com\/collections\/gritshift-suspension.oembed","provider":"LiveTheGnar","version":"1.0","type":"link"}